Snowboard Boot Sizing and Fitting

You have probably heard of Misshapen liners, new snowboard bindings, and foot enlargement in the snowboarding world, and all these are at times inevitable. Sooner or later, you will find yourself at the boot store. How should snowboard boots fit is a concern in every mind of a snowboarding enthusiast. It would be best if you had supportive shoes.

And in the long run, the experience you get comes to the boots you are dressed in. It’s therefore imperative to have them sized correctly. Should they be too small, they will cause fatigue and pain. On the other hand, if they are too large, it will cause inaccuracies when moving on the board. The size you buy depends on various factors discussed with this Hang on

Choosing the Right Snowboard Boots

Snowboard boots selection is dictated by what you need for your snowboard ride. It’s not just a matter of appearances, but there are more factors in play. 

How to Take Snowboard Boot Measurements

1. Foot Type and Size

When it comes to getting the proper snowboard boots size, consider the size and shape of your foot. You have to compare the boots you target with your daily shoes or your present boots. Are they broader, thinner, larger, or smaller than you require? Is there anything that makes them feel uneasy?

After you’ve considered that, consider how to determine your snowboard boot size using these considerations. The standard size of your shoes should be your starting point. From this point, determining the snowboard boot size is easy. Though the size of snowboard boots and shoes may vary depending on the brands, they are usually the same.

How broad are your feet? 

Depending on your feet type, be it broad, medium, or smaller sized, you always have to keep the regular shoe size in mind. Also, the size of your foot will dictate whether the boot should be too large or too tight. 

Your archway 

A boot will only give maximum support when it properly fits your feet. You should customize them with insoles and inserts if you require them. The use of inserts can expand your boot options since you can choose virtually any type of innersole and see if it makes the boot fitting. 

Your shin

Some designs may feel restrictive or unpleasant to high instep individuals since they compress the top part of your feet. If this is the case with you, get snowboard boots with a high instep to allow extra room while tight. 

Your ankles and calves

Since snowboard boots extend beyond your ankle, you’ll need to buy snowboard boots that fit your lower leg. A wide-calf snowboard boot provides a snug fit around the foot. Also, it ensures a comfortable fit above the ankle.

2. Style of Riding

Choosing the Right Snowboard Boots

Snowboarding calls for the appropriate degree of flex in every move. And each flex is dictated by the style of riding and your particular preferences. Flex may be gentle to rigid, with the most common medium. And there are also flex ratings ranging from 1 to 10 ( where one is the softest while ten is the hardest). 

Mountain riding 

Many snowboarders fit under this group, which encompasses all-terrain suitable for snowboarding. The most popular flex among mountain riders is soft to moderate. But when it comes to high-speed racing requires a strong flex and stiffness to maintain control.

Freeride

To gain edging power on hard snow, freeride, also known as extensive mountain riding, requires stiffness. In difficult situations, a firm flex gives greater control. Since freestyles are mostly set on terrain parks, you will need soft and flexible soles. 

Lace Preference

Every snowboard footwear must fit snugly, and the lacing will assist keep it all in place. Despite the inability of laces to salvage inappropriately sized boots, they are still important.

a)   Traditional – These laces can be tightened according to your needs, making them ideal for maintaining the boot-feet position. However, you may have difficulty knotting them when your hands are wet and are braced with gloves. 

b)   Quick-pull – Fasteners with quick-pulls comprise detached laces for your ankles and forefoot. Because it allows one to alter the fit, they are appropriate if you feel your boot has a less than perfect fit at their ankles.

c)   Boa – Changing the fit of this lace is simple and requires only one hand, even when wearing gloves.

How Should Snowboard Boots Fit?

How Should Snowboard Boots Fit

The correct snowboard boot size is essential to your safety and relaxed state. But, is there a proper way to wear snowboard boots? Well, all you need is a boot that fits your foot snugly from back heel to your toes, to the top of the arch of your foot. And, to prevent walking out of your boots, you want your shoes to feel snug. 

The boots should be comfortable to wear, even if you place your foot into them with little discomfort. After about two weeks of usage, the liners will begin to adjust to your fit. Also, if you have a heat-moldable or intuition liner, you may have other options to customize the fit.

Ensure your boots fit properly by using the appropriate ski and snowboard socks. Your regular socks will not provide adequate comfort. Therefore, you need snowboard socks that move as your feet and ankles move while snowboarding. Again, unlike conventional socks, these socks won’t clump, giving your boots a better fit. Learn how to put on your snowboard boots and bindings.

How to Take Snowboard Boot Measurements

Finally, the ideal way to measure your feet for snowboard boots is to try on several sizes in-store. It all comes down to trial after trial till you get the right match. You should spend 10 minutes moving around in your snowboard boots to determine how they fit. When you try on the boots, you should:

  • Perform a few lunges.
  • By rocking from your heels to your toes, you can shift your weight from your heels to your toes.
  • You should barely be able to touch the tips of the boots with your toes.
  • Make sure you are aware of any pressure points or areas of uneasiness.
  • You can determine whether the flex is too rigid or too soft by putting it to the test.

Remember, your boots gradually will break in and stretch out as you use them. Also, you need not go through significant pain or pressure spots when you wear them at first. Rather, consider wearing a smaller size or a different brand of boots if you can slip out of your current pair. 

Okay, ladies and gentlemen, finding a good fit can be achieved in several ways, such as correctly sizing the boots, customizing liners, and even making further alterations for matching your posture. In the long run, it’s all about twisting what you got in every possibility and seeing if it will fit you accordingly.

The rankings on rappellingequipment.com are curated to save you time by aggregating the best reviewed products from the most reputable companies. We may receive a commission if you buy something using a link on this page.

About the author 

Kevin

Kevin loves bouldering. Mainly because he can practice it alone without considering other people. Although he rediscovered this hobby in the last three years, the boulders turned out to be his most visited landmarks.

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

DOWNLOAD

eBook: Rappelling Equipment Guide

 $ 29.99  FREE

Download our Rappel Rapport eBook: a Rappelling Guide for Beginners. It's free.