Helmets, it turns out, aren’t that inconvenient and, besides safety, it offers some advantages: it keeps the head warm, gives a place to install a POV cam, and makes it possible to listen to the music when out on the hill, and surprisingly pleasant to wear.
Many new high-end snowboard helmets are just so light that you won’t even realize they’re on. Like with other outdoor gear, the trick is to choose a model that is right for you.
Helmets are designed to keep you safe on the hills by reducing the risk of a concussion. This article intends to assist you in determining the most optimal design features and fit. Keep on reading for additional information to assist you in making your purchase.
Is It Necessary to Put on a Snowboard Helmet?
Yes, to put it briefly. You must wear it if you’re bombing, careening, schussing, sliding, barreling, or in any other manner enabling gravity to drag you down on an icy, snowy hill at any rate. Helmet use has risen dramatically in recent decades, and it’s for a good cause. Due to advancements in gear and slope maintenance technologies, the sport keeps improving at recreational and professional levels.
People are skiing quicker and leaping higher in increasingly tricky terrain as a result of this. Helmet producers have adapted to the requirements of the market. The product line has evolved to become more comfortable, warm, stylish, and adaptable.
It’s difficult for producers or the helmet industry to demonstrate that putting on a helmet increases your odds of surviving a severe significant brain injury. Though, it’s difficult to claim that a protection-rated helmet won’t collect a few of the energy after a head injury.
Features of a Snowboard Helmet
When you’re chopping your way up a mountain, things may become hot. Check if your helmet has excellent ventilation that lets heated air leave so you don’t become too hot and sweaty, which may seem paradoxical. Manufacturers will add goggle ventilation systems in certain helmets to avoid goggle fog.
A shell is an outermost part of a helmet that serves to preserve your head. A decent helmet must be light and sturdy at the same time.
A liner is a softer inside portion of a helmet that absorbs impact. Most helmets come with additional padding for added comfort around the head. After a significant fall, you should often change your helmet.
Make sure your helmet has a goggle attachment. Some helmets also feature goggle ventilation, which helps remove heated air from your snow goggles, which can cause fogging.
Dial Fit System
It’s an easy-to-use dial mechanism that lets you quickly modify the size.
They provide added warmth and comfort when you’re out on the mountain in the harsh weather. Select a helmet that is comfortable and secure on your head.
It’s a mechanism for securing your helmet on your head via clips. Before fastening the strapping, make sure it’s snug around the head.
Audio Accessory Compatibility
Certain helmets offer audio compatibility, providing access to your smartphone to built-in headphones and listening to your favorite tunes while skiing.
Construction of a Helmet
Hardshell and in-mold construction are the two most common methods of manufacturing in skiing and snowboarding helmets. There are other variants, such as combining the two.
The European Safety Standard EN1077 and the American Safety Standard ASTM2040 are the safety requirements for snow helmets. Some helmets also comply with EN1078 for bicycling, skateboarding, and roller skating; they are All/Multi-Season helmets.
A helmet’s effect-absorbing EPS foam lining is in-molded with a durable polycarbonate outer coating for excellent durability without adding weight. An ideal ventilation system is achieved by combining the liner and shell.
They are made out of a bonded ABS shell as well as a lightweight EPS interior. This sort of helmet has fewer vents, but it is very affordable and durable.
Its structure blends hard shell and in-mold construction, resulting in a superb mix of weight and durability.
How to Choose Ski and Snowboard Helmets
Size and Fit
Above everything, a helmet must fit properly. In an accident, a bobbling helmet and overly broad around your head would not sufficiently protect you. You’re subjecting the forehead to pressure, sun, and cold, as well as yourself to mockery if it’s too little and sits high at the back of your head.
The helmet must sit approximately an inch below the tops of the brows on the forehead. It should fit snugly against the top of your goggles, with no gaps. Most helmets feature a way to alter their fit, making them suitable for a wide variety of head sizes.
It’s significant since it ensures the best fit, though it’s important to mention that you must still measure the head to acquire the proper helmet size. Your helmet is too broad and won’t protect the brain as effectively if there’s ample space between the movable band on the head and your outer shell.
Choosing the Correct Size
As the adage goes in this situation, measure twice and purchase once. To make it easier to determine the proper helmet size, you should use the precise sizing information given by the helmet manufacturers. Take a couple of minutes to measure rather than assuming and hope for a miracle.
Check the Size of Your Head
Wrap a soft measuring tape around its head, approximately an inch over your ears and brows, in the center of the forehead. Because many helmets are calibrated in millimeters, take your head measurement in centimeters unless you enjoy math.
For instance, if the circumference of your head is 40 cm, you should use a 46 cm helmet or a medium of 45-48 cm, according to the size scale of the helmet. However, if you can’t access a soft tape measure, a thread and a metal measuring tape or metal tape would suffice.
Please Put It On
Put your helmet on after you’ve received it. It should be comfortable to wear. A correctly fitted helmet should be snug all around the head to prevent movement but not so stiff that it compresses your head.
There should be no extra space between your head and the helmet. Also, ensure the strap on the chin strap fits snugly beneath your chin. Opening your mouth widely and adjusting the chin strap to fit comfortably is a simple method to tune in your fit. With regular usage, this should provide a correct, comfortable fit. Pay close attention to every area of pain or pressure.
Shake Your Head
Shake the head around while wearing the helmet. If it shakes or moves on its own, it’s tremendous. Move your helmet towards the right or left, up and down, with your hand. Your head’s skin should move in tandem with your helmet without it changing by itself. You can buckle it at this stage if you like, though it will not affect the actual fit of the helmet; keep it on the head.
The liner’s quality is an essential factor for your satisfaction. You should prefer good foam that molds to your head’s contour. Several foams are washable, making them perfect for cleaning. Look for versions with replaceable ear cushions for improved comfort and hearing. It will allow you to keep wearing the helmet when the weather warms up.
Ski and Snowboard Helmet Certifications
There is a lack of regulation in the United States that requires skiing and snowboarding helmets to meet any safety criteria. Snow helmets are fortunately certified to a security level by two independent bodies. In the United States, most merchants only offer items that fit one or more of those criteria.
American Society for Testing and Materials (ASTM)
The American Society for Testing and Materials (ASTM) is the American Standard for brands making helmets for sale in the United States. Snow helmets that have fulfilled all ASTM testing standards are granted the ASTM F2040 certification. The dynamic strength, endurance, and positioning stability are the emphases of the certification.
European Committee for Standardization (CEN)
Helmets are also certified by the European Committee for Standardization (CEN), classifying them into Class A and B classes. The most protective helmets are Class A, which manufacturers must build in a “whole shell” or “full face” form. Class B is the type of helmet that is less protective than Class A helmets because of the service area.
Still, they enable the participant’s ears to be uncovered for effective communication. The CEN Class B standard is satisfied by all of the approved helmets which are evaluated. The CEN’s certification title is EN 1077A/B, and it focuses primarily on impact testing.
Final Thoughts on Choosing Ski and Snowboard Helmets
Although the advantages are clear, putting on a helmet is mostly a personal decision when snowboarding or skiing. For this reason, they’re required at some terrain parks and resorts, so even though you don’t want to use one, knowing what else to watch out for will assist. For beginners, this guide will help them go and purchase a ski, splitboard, and snowboard helmets that meet their needs.
The rankings on rappellingequipment.com are curated to save you time by aggregating the best reviewed products from the most reputable companies. We may receive a commission if you buy something using a link on this page.