Angelite is a mineral salt with a pale blue color with a 3.5 hardiness on the Mohs hardness scale. However, I’m sure you want to know.
Can Angelite go in water? Exposing Angelite to water affects its structural integrity causing it to crumble. We use the Mohs hardness scale to determine stones that are too soft.
Stones that rate one is the softest, while those that rate ten (Diamonds) are the hardest.
Stones that rate five and below (including Angelite) should not be exposed to water. Angelite can crumble and revert to its original form- Gypsum.
So, Can Angelite Go in Water?
The Angelite stone must not go in water. Angelite loses its structural integrity in water and can even crumble.
Where Does Angelite Name Come From?
If you are searching for Angelite and are experiencing some trouble finding it, you can try to search for it under a different name—Anhydrate.
Angelite was first discovered in Peru and was renamed Angelite by members of the Crystal healing world because of its metaphysical properties.
The stone was also named Angelite because it belongs to a group of stones that have no hydration or water inside them. The name is translated to mean being without water or anhydrous.
Some believe the stone holds special powers. They believe you can use it to meditate and help you connect with your guardian angel.
Angelite is also called the stone of peace or stone of angels. Most believe the stone can help eliminate anxiety, fear, and worry.
What Are the Physical Properties of Angelite?
Angelite is a highly malleable stone containing Calcium Sulfate. It has a crystal structure with near-perfect symmetry.
This stone is not isomorphous, meaning that it can crystalize. Its overall gravity is 2.9, and (as mentioned earlier) it rates 3.5 on the Mohs scale, which explains its high malleability.
Often, Angelite is white; however, you can also find it in different colors like purple or blue.
Most people consider it a beautiful stone because of its pearly or glassy finish that occurs naturally (in most cases) and luster.
Angelite is an anhydrate that forms when Gypsum comes in contact with water. The water then evaporates and leaves anhydrous Angelite crystals.
The stone is also formed from another form of Gypsum called celestite that’s been compressed over millions of years.
While the stone was initially found in Peru, it has since been found in Poland, Libya, Germany, Mexico, Britain, and Egypt. Angelite’s physical properties (except its color) make it highly soluble in water.
All anhydrides are unstable and readily absorb moisture. Placing Angelite in water causes it to lose its structural integrity and crumble while reverting to its original form—Gypsum. This is an irreversible transformation.
Often Angelite is associated with other rocks like Halite, Galena, Calcite, and Pyrite; however, you can also find it with various other stones.
Angelite can also be confused with other stones; however, its unique crystal structure sets it apart.
Naturally, most stones are harder than Angelite and can be placed in water. However, it would be best if you did this within short periods.
How Does Angelite Form?
Angelite is formed when Gypsum comes into contact with water, which later evaporates.
Gypsum is a softer mineral that ranks lower than Angelite on the Mohs hardness scale. Its hardness is close to 2 on the Mohs scale.
Gypsum is a dihydrate that contains calcium, while Angelite is an anhydrate.
Gypsum has many uses, including making fertilizer, sheetrock, and drywall. It’s also used to manufacture plaster and chalk for writing on chalkboards.
Gypsum can be ground into fine grain, mixed with other materials like water, and used for several purposes.
People used the material to make sculptures in various early civilizations like Mesopotamia, Medieval England, Rome, and Egypt.
Gypsum’s chemical composition changes when its water evaporates, leaving the bonds stronger than they were before.
The mineral crystallizes to form Angelite. Angelite was first discovered near Hall in Tirol, Peru, in 1794.
Angelite is often found in deeper places than Gypsum is. This makes more sense because water is often present in higher strata.
Additionally, the high temperatures and extra pressure applied by above-ground forces gypsum deposits to lose water and crystalize to form Angelite.
Angelite turns to Gypsum when exposed to water. However, altering the water with Potassium Chloride or Sodium Chloride (salt) increases the water’s hardness.
Adding the water to Gypsum affects its structural integrity, especially when you increase the temperature. Artisans and manufacturers use this process to create Angelite properties that last long periods.
Angelite may lose its integrity when exposed to water for long periods; however, it still has a high-enough hardness level to sustain its integrity when cared for properly.
Adding special chemicals to Angelite alters its structure to make it stronger.
This isn’t an entirely artificial process. Instances where heat and sodium chloride mix and alter Angelite’s structural composition making it harder, often happen in salt mines.
This is why Angelite is commonly found in basins and salt mines.
Angelite’s origin can be described as a natural occurrence resulting from a chemical reaction between environmental chemicals, water, and Gypsum.
What Are the Best Ways to Take Care of Angelite?
You should not put Angelite in water if you want it to maintain its structural integrity. Doing so will result in the mineral turning to Gypsum. However, there are other ways to clean it.
You don’t have to keep the mineral perfectly clean. Instead, you can polish it using a dry and soft cloth to keep it clean and shiny.
You should protect it from the elements and prevent it from damage and scratches. Remember, Angelite is quite fragile because of its high malleability.
Thus, it would be best to take extra precautions to ensure you don’t crash it. You can do this by storing it away from other minerals and objects that may crush it.
You can store it by keeping it in a soft bag or sock you don’t use anymore. Any soft material can still work if you don’t have either material.
Be sure to take Angelite off when swimming or showering and store it in a dry and cool place when you aren’t using it.
- Can Moldavite Go in Water?
- Can Amethyst Go in Water?
- Can Sodalite Go in Water?
- Can Garnet Go in Water?
- Can Selenite Go in Water?
- Can Green Aventurine Go in Water?
- Can Citrine Go in Water?
- Can Carnelian Go in Water?
- Types Of Lapis Lazuli
- Johanna Färber Climber
- Spiritual Meaning of Lapis Lazuli
- Can Lapis Lazuli Go in Water?
- Can Tourmaline Go in Water?
- Benefits of Carnelian Crystal
- Pink Crystals: Their Meaning, Benefits, and Healing Properties
- Can Blue Lace Agate Go in Water?
- What Causes Geologic Events Such as Earthquakes?
The rankings on rappellingequipment.com are curated to save you time by aggregating the best reviewed products from the most reputable companies. We may receive a commission if you buy something using a link on this page.
Last Updated on February 6, 2023 by Roger