How to Rappel from a Tree? How Tree Rappelling is Done!

How to Rappel from a Tree

Rappeling from a tree is a common adventure amongst adventurers and occurs both for exploration purposes and a way out while hiking some routes. Tree rappelling involves descending using a rope with the tree as the natural anchor.

Tree rappelling involves several practices that ensure the safety of the climber when descending, including the fact to ensure that the tree is alive, is thick enough, and observing around to ascertain that its roots are sufficiently strong.

The main purpose of observing the practices is to ensure that the tree can support an individual’s weight before rigging anchor on the tree. 

Can You Rappel from a Tree?

Yes, you can rappel from a tree as a choice exploration adventure and as a way to find the trail on some routes while hiking. 

Is it Safe to Rappel Off a Tree?

Yes, it is safe as long as find a healthy tree to build the rappelling tree anchor. Some of the greatest troubles when rappelling is finding rappelling anchors, particularly during an exploratory setting.

During such moments, alternative anchors could be the only solution. By and large, most adventurers highlight them as perfect rappelling aids during such circumstances. 

It is, therefore, safe to rappel off a tree. However, the tree should meet a few necessities, such as sufficiently thick and a firmly anchored root system.

In other instances, it might be critical to outsource an option or rig up a webbing rather than rappelling off a tree, particularly if the trees available do not meet the necessities. 

Sale
Strapworks Heavyweight Polypropylene Webbing – Heavy Duty Poly Strapping for Outdoor DIY Gear Repair, 1 Inch x 10 Yards – Black
  • UTILITY WEBBING – This strapping is water resistant and won’t stretch like nylon does. Suitable for outdoor use, this heavyweight webbing is a must-have when camping, boating, rafting and more.
  • FADE RESISTANT- Polypropylene webbing is made from thermoplastic resins. The material is resistant to moisture, acids, oil and grease. It even has some ability to float on water.
  • WIDE VARIETY OF USES – Strapworks polypropylene webbing is tough with a tensile break strength of 900 pounds. It measures .06 in thickness and is available in a variety of vibrant colors.

Last update on 2024-11-06 // Source: Amazon Affiliates

Tree Rappelling

What Makes a Tree Safe to Use as an Anchor?

Certain factors guarantee that a tree is safe to use as an anchor. The factors should be the priority before using the tree as an anchor. These are the central consideration before tree rappelling. 

  • Size
  • Quality of the tree’s rooting system
  • How lively the tree is 
  • The type of a tree
  • Backing up a tree anchor 
  • Consider learning the biner block rappel technique

Check the Tree Location

Checking the tree location is an important step to help an individual understand their options. Some of the trees that one should not consider as potent anchors are growing close to the edge of a cliff.

These trees appear as though they are ideal for the purpose, but they might not serve the purpose effectively.

The soils at the end of the cliff are usually insufficient to hold the trees firmly to the ground; the roots are often shallow and inappropriately established compared to the ones inland. Trees located about three meters away from the edge are more suited and preferable. 

Check if the Tree is Healthy and Alive

It is paramount to note that trees that are dead or those about to die are no-go zones. They should not be considered potential anchors even if they appear stable or strong. Typically, they are often rotten and have roots that cannot hold anything heavy. 

Checking the health of a tree is another critical aspect. Some of the considerations to factor in when observing the health of a tree are listed below.

  • The leaves: They should be healthy, evenly distributed, and with an assuring color
  • Bark: The tree back should be intact, not unless for trees such as maple, eucalyptus, and birch, which exhibit peeling characteristics. Should not have any moss growing on it, open wounds, holes, or cracks
  • Should not have numerous bugs: this is ascertainable by checking for the presence of small holes on the back, which if numerous could indicate possibilities for insect infestation. 

Check the Quality of the Tree Root

Typically, trees with thick tree trunks are presumed to be relatively strong and probable anchors. However, there are instances when the available trees are not quite thick. In such instances, it is essential to stick to the following guidelines. 

  • The tree you settle on should have a truck that is at least thicker than an individual’s thigh.
  • In terms of measurement, such a tree should exceed a thickness of 20cm in diameter. 

After selecting the tree, an individual should push the tree like they are trying to make it fall. An acute observation during this step is to observe whether the tree makes any moves, following which it should be abandoned for another that does not move at all. 

An individual can enhance the security of a tree by using two trees that are close to one another. When anchoring the rope on two trees, it is paramount to ensure that the angle of the ropes does not exceed 90 degrees to ensure the load is evenly distributed between the trees. 

VOXLOVA Rock Climbing Rope, Outdoor Static Climbing Rope, 10mm High Strength Safety Rope, Hiking Tree Climbing Fire Escape Rappelling Rope, Fire Rescue Rope 10M(32ft)
  • 【HIGH QUALITY CLIMBING ROPE】- The rock climbing ropes are 10mm(2/5in) in diameter, made of reinforced polyester fibers and tightly woven sewing, 15 extra thick whole core ropes, moderate softness and strong binding ability, more wear-resisting and durable. Different lengths for choice 32ft & 65ft.
  • 【SAFETY, STURDY & STRONG ABRASION RESISTANT】- Low ductility static rope can reduce the security risks caused by the rope extension. Made of reinforced polyester fibers, 15 extra thick whole core ropes,the max tensile force of the rock climbing rope up to 16KN(3597lbs).
  • 【WIDELY APPLICATION】- Perfect for climbing, hiking, camping, tree climbing, boating, caving, downhill, engineering protection, magnet fishing , escape, rescue work, backup, etc.

Last update on 2024-11-06 // Source: Amazon Affiliates

How to Set Up the Tree Rappelling Anchor?

To set up the tree rappelling anchor you will need to have answers to the questions listed below.

  • What Equipment Should You Use for Tree Rappelling?
  • Where Should You Tie the Anchor to the Tree?
  • How to Tie the Anchor to the Tree?

What Equipment Should You Use for Tree Rappelling?

It is recommendable to assemble the anchor by possessing a rope strap or sling formed of webbing rather than relying on an adjunct cord around the anchor. Afterward, the ascending aid should go via the runner rather than looping directly on the tree. 

Sale
GM CLIMBING Pack of 3 16mm Nylon Sling Runner 60cm / 24inch (Fluorescent Orange)
  • GM CLIMBING 16mm Nylon Sling, 22kN, CE and UIAA certified, made of tube nylon webbing, sewn in bar-tack for high durability.
  • Width: 16mm / 5/8inch; Length: available in 30cm / 12inch, 60cm / 24inch and 120cm / 48inch. Tube Nylon Webbing
  • High resistant to wear, nylon sling has a long useful life.

Last update on 2024-11-06 // Source: Amazon Affiliates

Climbers use both tubular and flat webbing types, with the former being thick and stronger. It is, therefore, more the recommended webbing for climbing.

On the other hand, flat webbing is often used on harnesses and is not recommended for climbing. The recommendable tubular webbing is about an inch thick in width. 

There are possibilities of using the descending rope directly on a tree, but there are several reasons we have listed below why it is not recommended.

  • Tree trunks often cause abrasions on the ropes, leading to damages to the rappelling ropes
  • Frequently, ropes get dirtied with tree saps. 
  • Retrieving ropes from the trees is often difficult because of friction.
  • Also, ropes are likely to cause injuries that might kill the trees with time. 

Where Should You Tie the Anchor to the Tree?

Typically, the runner and the ropes are supposed to be tied at the bottom of the tree’s stem. An individual can ease the rope retrieval by attaching the runner to a tree branch.

It is critical to note the significance of tying the anchor at a good height since it guarantees a greater advantage. Another critical thing to ascertain is the strength of the branch is sufficient to hold the load of the rappel. 

How to Tie the Anchor to the Tree?

The common ways available to tie the runner or slings on a tree are listed below.

  • Tying the runner around the tree.
  • Looping it around the tree.
  • Use a girth hitch to secure a tied runner around the tree.

If an individual’s runner is long enough, it is recommended to tie it two times around the stem. The rope for rappelling should be fixated to the bottom loop while the top loop s around the tree to keep it in the right position.

This is particularly significant when the intention is to secure the runner in a single position on the tree. Moreover, it plays a critical role on small trees where keeping the anchor low reduces the advantage on the anchor. 

Conversely, an individual might want to keep the anchor higher up in large trees, which eases retrieving the rope later on. It is also advisable to add one to two more runners when individuals feel uncertain about a single runner. 

When using runners that are made of webbing, a climber should take note of several things that are listed below.

BLACK DIAMOND Equipment 10 mm Dynex Runner 30 cm
  • Dynex is highly abrasion resistant, strong and lightweight
  • 10 mm wide Dynex
  • Colors specific to lengths

Last update on 2024-11-06 // Source: Amazon Affiliates

  • Ensuring that each rappelling anchor knot is tied using a water knot, also termed a ring bend. The knot can change over time to become loose, especially after being used a number of times. This necessitates checking the knot before an individual can use the runner. The risk is also minimizable by using longer runners and tying overhand knots at the tails. 
  • Do not put twists into the runner when tying the knot. 
  • Ensure that the tails have a height that exceeds eight centimeters when tied. 
  • When individuals are through tying the knot, they should step on the sling and pull it hard enough to make it firmer. This step is crucial in reducing the risk associated when the knot unties. 

How to Attach the Rappelling Ropes to the Tree?

People prefer rappelling using double strands rather than a single strand in most cases. The following options are employed to secure the rope to the sling or runner.

Option 1. Pass the Rope Directly through the Runner or Sling

It is important to note that there are chances of causing friction during this stage and, therefore, demand utter precision. 

Option 2. Attach the Rope to the Runner with a Rappel Ring

At this step, the critical consideration is avoiding welded rappelling rings because they can easily break.

This method is particularly safe since it also prevents the occurrence of damages to the ropes. Consider using two rappel rings to enhance the level of safety.

PROND Aluminum Rappel Ring, Climb Perfect Tension Aluminum Alloy O-Ring, 23KN Rappel Rings for Rock Climbing Arborist and Hammock (Blue – 1 Pcs/Pack)
  • ✔ HIGH QUALITY — PROND aluminum rappel ring adopts seamless forge technique, which can be used as a safe connection point or anchor. 360 degrees all-round design avoids the danger of improper loading direction while loading stuff. Ring’s thick radius (15mm) avoids stuck ropes while pulling.
  • ✔ SAFE — The O-Ring made from high strength hot forged aluminum alloys material (surface anodized oxidation) with sturdy and rugged industrial grade quality. Pass 23KN (5,175lbs) breaking strength tested, 3,000lbs recommended working load limit.
  • ✔ CONVENIENT — Easy installation ideal for fast use in adverse conditions and easier to handle heavy loads. Light and compact rappel ring are easy to carry and take up almost no place in your rack. Perfect amount of friction for the task. Ideal for the retro climber or search and rescue professional.

Last update on 2024-11-06 // Source: Amazon Affiliates

Option 3. Attach the Rope to the Runner with a Locking Carabiner

Using locking carabiners is considered safer than rappel rings though there are cost implications.

PETZL, OXAN Carabiner, Black
  • Intended use: The OXAN carabiner is designed for use in difficult environments and is particularly suitable for setting up anchors for connecting to metal structures.
  • Size and strength: This heavy-duty carabiner has a 20 or 22 mm gate (depending on style) and a major axis strength of 38 kN.
  • Easy to use: The symmetrical, oval shape allows for optimal positioning, reduces risk of a catch point, and facilitates easy rotation.

Last update on 2024-11-06 // Source: Amazon Affiliates

What is the Best Way to Equalize the Anchors when Rappelling from Two Trees?

If an individual is rappelling from two trees, it is vital to note that keeping the angle between the runners below 90 degrees.

This step involves ensuring that the anchor’s points are at an equal angle while using a separate runner on each tree.

Equalizing the anchor points ensures that the load is appropriately distributed between the anchor points, which enhances reliability. 

It is possible to check the equalization by ensuring that the load runs down the center of the angle that the runners form.

The process might need redoing several times before achieving accuracy, but the most vital thing is ensuring the angle remains as advised and that the anchors are reliable. 

Can You Rappel from an Existing Anchor on a Tree Safely?

An individual comes across a tree with the runners already tied in some instances. It is important to avoid assuming that such a tree is the best choice. Instead, the individual should perform all the important checks since some aspects might have changed, such as the trees’ health. 

At the same time, the damage might occur on a tree following subsequent rappelling. Here, the individual should check to ensure no cuts or deep grooves occurred by the last climber’s ropes.

If the tree meets all the highlighted requirements, the climber should remove the older runners and utilize their own. Own runners can guarantee safety since the sun or weather might have compromised the former runners. 

Frequently Asked Questions about Tree Rappelling (FAQs)

How to retrieve a rope after rappelling?

Retrieving a rope after rappelling involves setting up the rappel to ensure the rope is not attached to the anchor. This is achievable using a two-strand rappel or a tagline rappel.

The two-strand rappel utilizes two pieces of rope that the climber should pass through their belay device to lower the rope. The method is also achievable using a single rope that is doubled up or two connected ropes using a knot.

Sale
PETZL – GRIGRI + Safety Device – Unisex, Orange, One Size
  • Safety device with locking assistance and anti-panic lever, excellent for entry and intensive use.
  • Compatible with all dynamic single ropes from 8.5 to 11 mm and optimized for diameters from 8.9 to 10.5 mm.
  • Safety comfort thanks to locking support by clamping cams: In the event of a fall or a rest of the climber, the rope tensions, the clamp cam rotates and grips the rope to block it.

Last update on 2024-11-06 // Source: Amazon Affiliates

How to build a tree anchor?

Building a tree anchor requires two double-length slings. The tree should have a diameter that exceeds 5 inches and should be firm on the ground.

After ensuring that, an individual should wrap the cord/slings around the tree, followed by marching and tying on a bight to get a figure eight, which should serve as the master point.

What’s the difference between abseiling and rappelling?

Typically, there are few differences between abseiling and rappelling. The two activities are done outdoors, using a rope or a friction device and descending on a vertical wall or a cliff face.

The only notable difference relates to their cultural differences, with the term “abseiling” being common in European countries while “rappelling” is often used in the United States. There are, however, other nations that use “rappel” and “abseil” mutually.


Follow Us